What Is Paint Correction on a Car?
Paint correction is the removal of fine lines, scratches and discoloration from the finish of your vehicle. If you take a good look at your car, you inevitably see swirls, scratches and water marks.
These imperfections in the finish are caused by a number of things, such as:
- Small granules of abrasive materials blowing in the wind
- Acid rain
- Automatic car washes with dirty brushes
- Grit on sponges and rags with you wash your own car
These common occurrences add up to ruin your paint job. If you don’t need to repaint your car or don’t want to have a car wrap, paint corrections is the best route to take. Let the experts at the Waxman of Tristate Car Detailing Center transform your ride into a showroom specimen with professional paint correction near me in Jersey City.
Related: What is Paint Correction on Car, and How Does it Work?
How Is the Car Paint Correction Performed?
Before the paint correction, the car body must be thoroughly cleaned and disinfected to prevent damage to the paintwork during polishing. Next, the specialist assesses the condition of the paintwork and identifies scratches, stains, or other defects that require attention. After that, sanding with a fine abrasive is performed to remove defects from the surface of the paintwork, and finally, multi-stage polishing, consisting of different degrees, is used to smooth and shine the paint. After polishing, a protective coating is applied to help maintain a smooth and shiny surface.
What Types of Cars Should Have Paint Corrections?
Any type of vehicle is eligible for car paint correction. Paint correction is usually done before ceramic car coating or protectant film is applied. Paint corrections can last a few years if properly maintained and protected. A vehicle must be washed and dried thoroughly before starting this process.
Car paint correction is usually done in three stages and your vehicle may need one or all these stages:
- Major defects in the surface are repaired — this is also known as one-step paint correction.
- Different types of compounds and pads are used to bring the clear coat to its original condition.
Final polish — known as jeweling — is done to perfect the finish before adding paint protection.
Related: How Much Does Car Paint Correction Cost
Each stage goes deeper into the clear coat of your vehicle. You want to get paint corrections done by the professionals at Waxman so as not to ruin the finish of your ride. The time it takes to complete the process depends on how bad the paint has gotten. Contact the craftsmen at Waxman of Tristate Car Detailing Center to have your wheels in red carpet condition in no time. Not only will you look sharp, but you’ll retain — if not increase — your car’s value.
